Frigidaire RL2352 Manual do Utilizador Página 3

  • Descarregar
  • Adicionar aos meus manuais
  • Imprimir
  • Página
    / 6
  • Índice
  • MARCADORES
  • Avaliado. / 5. Com base em avaliações de clientes
Vista de página 2
3
CONTENTS
Instructions for the User
Important Safety Information 2
Description of the Appliance 4
Operation 4
Before use 4
Setting the temperature 4
Fresh food refrigeration 5
Normal operating sounds 5
Movable shelves 5
Positioning the door shelves 5
Hints and Tips 5
Maintenance and Cleaning 6
Internal cleaning 6
External cleaning 6
When the appliance is not in use 6
Changing the light bulb 6
Defrosting 6
Something Not Working 7
Instructions for the Installer
Technical Specification 8
Installation 8
Positioning 8
Rear Spacers 9
Electrical Connection 9
Door Reversal 10
10
Door reversal directions
1. Disconnect from the electricity supply.
2. Gently lay the fridge on its back with the top held
away from the floor by 5-8 cm (2-3 inches) of
packing;
3. Remove the bottom hinge (1) retaining screws
and remove the foot (2);
4. Slide out the fridge door from pin (G), unscrew
the latter and then refit it on the opposite side;
5. Unscrew the foot on the left side and refit it on the
opposite side;
6. Remove the two screws which mask the holes for
fixing the hinge from the left hand side;
7. Refit the door, the lower hinge (1) and the foot (2);
8. Unscrew the handle. Refit it on the opposite side
after having pierced the plugs with a punch.
Cover the holes left open with the plugs supplied
in the documentation pack.
Important
After completion of the door reversing operation,
check that the door gasket adheres to the cabinet. If
the ambient temperature is cold (i.e. in Winter), the
gasket may not fit perfectly to the cabinet. In that
case, wait for the natural fitting of the gasket or
accelerate this process by heating up the part
involved with a normal hairdryer on a low setting.
PR220
1
2
G
Vista de página 2
1 2 3 4 5 6

Comentários a estes Manuais

Sem comentários